Products for rework & repair
Solder pastes for rework & repair
Solder wires for rework & repair
-
IR 3
Interflux® IR 3 is an absolutely halide-free, lead-free, no-clean solder wire that has been developed for robot soldering. It provides low spattering, fast wetting, low soldering tip contamination and low residue. IR 3 can also be used for laser and hand soldering with the same advantages.
-
NH 1
Interflux® NH 1 is an activated no-clean colophony free and lead-free solder wire that gives fast and repeatable soldering results on a wide range of surfaces including brass. NH 1 provides fast wetting and low spattering making it particularly suitable for robot and laser soldering but also for normal hand soldering.
-
RosIX 705
Interflux® RosIX 705 is an activated rosin based, no-clean solder wire with increased wetting ability in lead-free and SnPb(Ag) alloys. RosIX 705 can be used on surfaces that are difficult to solder like e.g. OSP, Ni, Zn, brass, German silver, ... as well as on degraded and oxidized surfaces.
-
Aquasol 4018
Interflux® Aquasol 4018 is a high activity solder wire with water soluble residues in SnPb and lead-free alloys. Very good wetting ability on surfaces with poor solderabilty. Residues must be cleaned.
Residues can be cleaned with DI water at 35°C-45°C (95°F— 114°F).
OR H1 to EN and IPC standards
Flux content: 2,5% -
IF 14
Interflux® IF 14 series are colophony free, absolutely halide-free, no-clean solder wires with easily removable residues in SnPb(Ag) and lead-free alloys.
-
Flexsol 903
Interflux® Flexsol 903 is an absolutely halide-free, no-clean solder wire with reduced spattering properties in lead-free alloys.
RO L0 to EN and IPC standards
Flux content: 2,2% and 3,5% -
QF 70
Interflux® QF 70 is an absolutely halide-free, no-clean lead-free solder wire with fast wetting for fast soldering operations. QF 70 can be used in both hand soldering and automated soldering processes.
-
LMPA-Q hand soldering kit
The LMPA-Q hand soldering kit can be used for applications where slow soldering or poor through hole fill with Sn (Ag)Cu alloys are a problem. The hand soldering process with the kit will be faster and through hole fill much easier.
-
i-Flex 400
i-Flex 400 has been replaced by IF 14.
-
IF 1000M
IF 1000M has been replaced by RosIX 705.
-
ResIF 435L1
ResIF 435L1 has been replaced by NH 1.
-
IF R88
IF R88 has been replaced by RosIX 705.
-
Laser 25
Interflux® Laser 25 for lead-free alloys is a halide free no-clean solder wire with extremely low spattering properties.
Auxiliaries for rework & repair
-
Tip Tinner
Interflux® Tip Tinner cleans and retins tips of soldering irons. The regular use of Tip Tinner can substantially prolong soldering tip life.
-
Anti-Oxidant Pellets
Interflux® Anti-oxidant pellets minimize the formation of oxides on lead-free and SnPb(Ag) solder baths. Used as an addition in the solder bath.
The product is not recommended to be used in closed nitrogen machines nor in combination with Ni-doped soldering alloys. -
Purgel
Interflux® Purgel is a neutral cleaner/conditioner for pumps and valves of dispensing systems that cleans and preserves dispensing system parts when not in use.
Soldering fluxes for rework & repair
-
Flux Pen
Several Interflux® fluxes are available in a flux pen. The refillable flux pen has a very fine glass fibre tip that allows flux application only on the solder joint which avoids flux residue in the surrounding area giving esthetically clean soldering results. The non refillable flux pen is more economic.
Standard fluxes that are available in the flux pen: IF 8001, IF 6000, TerrIFic RP 65, IF 2005M, IF 2005C. -
IF 6000
Interflux® IF 6000 is a rosin containing, no-clean soldering flux with increased process window for selective fluxing applications, typically used in hand soldering and rework and repair.
-
IF 7500 HAB
Interflux® IF 7500HAB is a no-clean, halide-free tacky gel flux with increased process window. Suitable for reballing and BGA rework.
-
TerrIFic RP65
TerrIFic RP65 is a no-clean water based soldering flux for selective fluxing applications, typically used in hand soldering and rewok and repair.
-
IF 8001
Interflux® IF 8001 is a solvent based, no-clean soldering flux with low residue formation for selective fluxing applications, typically used in hand soldering and rework and repair.
-
IF 8300
Interflux® IF 8300 is a no-clean, halide-free tacky gel flux suitable for reballing and BGA rework.