home > products > solder wire > lead free > if 14 - 16
Search for:
IF 14-16

INTERFLUX®

IF 14-16 is a resin based, absolutely halogen free, no-clean solder wire.
In addition IF 14-16 is 100% colophony free which drastically limits the hazardous components in the fumes during soldering.
IF 14-16 solder wire is classified as RE/ L0 according the J-STD-004A standard.
Available lead free alloys are:
SAC305
SnAg3,5
SnCu0,7

 

IF 14-16 solder wire

  
Application

The IF 14-16 should be applied slightly to the point where component, pad and soldering tip meet.
Add subsequently, without interrupting the heat supply, the correct amount of solder.
 
Recommended soldering tip temperature setting is 320°C-360°C (625°F-680°F)
 

 

when soldering of more dense materials is required (Ni,Zn,…), a temperature up to 420°C (790°F) is allowed.
 


 
 
   
   
   

 
Technical specifications

 

 


flux type
flux content
j-std-004a class.
halide content
wire diameters (mm)


wire diameters (inch)

 


IF 14
1,6%
RE/ L0
0,00%


0,35(not forSnCu) - 0,5 - 0,7 - 1,0 - 1,5

.014(not for SnCu) - .020 - .027 - .04 - .06
documents  
 

technical data sheet
pdf IF14 soldering manual


     msds

 


packaging


Interflux IF 14-16 solder wire is available in 450g spools for SAC and 500g spools for SnAg and SnCu alloys in boxes of 12.
   
   

   
 
 
© 2007-2008 All Rights Reserved by Interflux Electronics